500 results in 0.0691 seconds.
-
In my area, MN,WI... The utilities don't seem to dry the gas until the frost gets in the ground. A dryer with silica beads absorbs the moisture before... -
Fmq2 p36
FMQ2 3600 psi for sale. Newer compression module. 1513 hours, 10 min 55 sec to fill test tank. With hose and nozzle and a dryer filter and fresh cartridge.... -
The C3 is outdated and new parts are not available but here is a bit of info. If you dig around in the cngchat files a bit there is likely a manual. ...Leave a comment:
-
Just to chime in here. I have a '06 F150 bifuel with a Prins system. A couple years ago I had strange issues with misfire, loss of power during cooler...Leave a comment:
-
There is an Oring grease available at auto parts stores. It lubricates the Orings to help slide the parts together.Leave a comment:
-
Check to see if your inlet receptacle has a metal mesh screen. (when looking in the tip. If so, the screen is plugged. Not sure if it is legal but you...Leave a comment:
-
The FM4 is the forerunner to the FMQ2. The latter can be 3000 psi or 3600 psi. Parts are interchangeable. for the FM4 and Q2 P30. Sitting unused for 27...Leave a comment:
-
Brit, the Fuel Maker hoses are - 3600 psi have 7/16" LH thread at the nozzle end and the 3000 psi has 9/16" LH thread. The plug in end is different...Leave a comment:
-
If you or someone you know is an electronics service person, you can look for a likely ground of a component. If not it sounds like a new EM is due.Leave a comment:
-
Assuming you all are talking about a newer replaceable fuse holder. Check the end of the fuses for burn discoloration. If so dab the end of the fuse with...Leave a comment:
-
Sounds like you have a Q2. 3000 psi or 3600 psi? Never tried putting a Phill hose on a Q2 but with the larger coupling it is doubtful. Your hose blew...Leave a comment:
-
If you dig through the archives on this site you should be able to find a manual on the FMQ2.The manual will have diagnostics procedures, installation,...Leave a comment:
-
Authorized fuel Maker companies in California are:
Clean Energy 866-809-4869 Newport Beach (may be Mansfield Gas Equipment now)
JayCox CNG...Leave a comment:
-
I ran across an inlet valve that had a metal mesh filter before the check valve. It can be seen when looking in the tip. Removed the filter and all resolved....Leave a comment:
-
I had a similar issue with switching to gasoline about every 5 miles or so on a 100 mile trip. On the way back the CNG quit completely. After a while...Leave a comment:
Leave a comment: