Hello from CA

[300mileclub]

40HP Ingersoll compressor skid $32,500 :

https://www.ebay.com/itm/Cng-Station...dQAAOSwXfJfvFC z

Three Storage tubes $18,500 :

https://www.ebay.com/itm/CNG-ASME-ST...4oAAOSwC2tfkwB D

Dispensers Tulsa$750 Kraus$1500 Angi$2800 :

https://www.ebay.com/itm/Tulsa-62-CN...GwAAOSw9Ctf08e N

https://www.ebay.com/itm/CNG-Dispens...V4AAOSwTzBeE4u D

https://www.ebay.com/itm/Angi-2-hose...k4AAOSw2m9cl9L C

[300mileclub]

CNG station equipment for sale:

$150K: Twin 40HP Ingersoll; 5 Spheres; Tulsa twin hose dispenser; card reader DALLAS TX WiseGas

https://www.ebay.com/itm/Entire-CNG-...0MAAOSwy11fswN s#rpdCntId
_________________________________

$54K: Twin 20HP Ingersoll; 1 Sphere; Tulsa twin hose dispenser; card reader; 2 Xebec dryers; 48 DOT bottles; three 12" foot ASME 5500psi-add $11K CALUMET IL

https://www.ebay.com/itm/CNG-Station...cUAAOSwteRdwjD Y

[cngmike]

CNG station in Ft Pierce FL on eBay $250K. Station never operated due to incomplete PLC installation. 250HP Aspro (Ariel?); 3 spheres; two twin-hose dispensers; Comdata:

https://www.ebay.com/itm/Entire-CNG-...8AAOSw6N1fswIH

Arrow is out of Oklahoma. Tulsa gas put together some stations using them.

[cngmike]

CNG station in Ft Pierce FL on eBay $250K. Station never operated due to incomplete PLC installation. 250HP Aspro (Ariel?); 3 spheres; two twin-hose dispensers; Comdata:

https://www.ebay.com/itm/Entire-CNG-...8AAOSw6N1fswIH

Looks like a TMC package.

[300mileclub]

CNG station in Ft Pierce FL on eBay $250K. Station never operated due to incomplete PLC installation. 250HP Aspro (Ariel?); 3 spheres; two twin-hose dispensers; Comdata:

https://www.ebay.com/itm/Entire-CNG-...8AAOSw6N1fswIH

[300mileclub]

Corbin KY CNG station in this thread has been increased from $250K to $500K. Unknown make of compressor is now listed as Arrow - which likely means Ariel:

https://www.ebay.com/itm/CNG-Compres...0AAOSw~apfpH0C

[300mileclub]

Three 24' CNG storage tubes on eBay $43K Dallas TX (classified listing - no auction end date). It's worth looking at this auction to see storage specification chart for the tubes - pressure, volume, gal equivalent as well as conversion factors. At 4500 psi a 24' tube holds 76gge:

https://www.ebay.com/itm/CNG-Storage...TcAAOSwS6FfseE w

The twin compressors are being offered on eBay for $75K as well (classified listing - no auction end date):
(2) 125 HP compressors 250 SCFM @ 42 psig 120 GGE per hour.
(2) Knox-Western TP-245, suction pressure from 30 to 55 psig

https://www.ebay.com/itm/CNG-Compres...vQAAOSw4QRfsun 9

[John Mitton]

Yes, the days of "build it and they will come" are, unfortunately over now that the automakers are no longer offering CNG vehicles to the general public. You have got to work with one or more fleets, overlay the routes to find common points where a station makes sense, and get fuel contracts in hand. The good news, however, is that heavy-duty uptake of CNG continues to be strong.

[joe_kan]

Looks like this thread started as a potential business opportunity/inquiry and morphed into where all the deals are on used CNG filling station equipment. Also, looks like the original poster has not been engaged well enough. My input is to start by analyzing the business case for the area. What is the demand and how are other stations in the area doing? This business, like any other, needs to have a demand for the product that can be delivered for a profit. I would start with a survey of the individual and fleet CNG vehicle operators in the area. The size of the station is usually selected based on the demand but a great deal on used equipment would allow for over sizing if space is available. A better scenario is partnering up with a fleet operator in the area if possible maybe at a lower fuel cost to get going. This would also help with demand. This is like any other business except that CA may have some tax breaks for alternate fuel. Also keep in mind that one cannot just plop down a system on a concrete pad and start selling CNG (especially in CA). There are start-up costs associated with permitting, transporting the equipment, installation (or reinstallation), rebuild, and infrastructure. Just saying - nice to pontificate but serious businesses require careful consideration.

My brother asked me to look at the possibility of going CNG for his fleet of 12 plumbing vans last year. I could not justify the cost with gasoline at the price it has been recently and we were definitely considering some of these great deals out there for used equipment.

Good luck out there.

[300mileclub]

Complete CNG Compressor Station Located In Corbin Kentucky $250,000

Six spheres, class 8 truck fill volumes (Frito big-rigs), FuelMaster card reader, single Tulsa Gas Tech twin-hose dispenser, ingersoll (?) compressor on a skid. 800-nine zero nine-4403

BUY IT NOW price $250,000 No close date on auction.

https://www.ebay.com/itm/CNG-Compres...0AAOSw~apfpH0C

[300mileclub]

Pair of storage tubes approximately 10 ft long are being auctioned on eBay originating in Mojave CA. Working pressure is only 2800 psi (mfg 1959) and tanks require hydrostatic testing to certify:

https://www.ebay.com/itm/Compressed-...8AAOSw3GlcPoOz

[300mileclub]

In April 2016, Virginia Transportation Corporation began using 30 CNG Peterbilt 365 Daycab car-transport trucks to move 1200 Honda vehicles from its Lincoln AL plant to a rail loading facility at 860 Ironaton Cutoff Road, Talladega, AL where the CNG station is located.

That CNG station is now being sold. For terms of the sale, contact [email protected]

http://cngsale.com/

Station consists of:
Ariel JGQ-2 4-stage piston compressor
Trillium HYC hydraulic 2-stage intensifier
2 Kraus Global / Gilbarco twin hose dispensers
5 CPI 23'X20" 5500psig ASME tubes
PSB Industries dryer
Allen Bradley controls

https://www.automotivelogistics.medi.../14573.article

https://www.ngvamerica.org/2015/12/0...da-operations/

https://www.motorweek.org/features/g...on-cng-station

https://www.youtube.com/watch?v=_M9yqsQ-Sf8

[300mileclub]

CNG station used by Greenville Transit is for sale in South Carolina. Gas has been disconnected from station. Seller figures scrap metal value only. But it does have two short tube tanks and is a vintage Trillium compressor. Presently in the $500 range. Auction ends 11 July 2019 before midnight PDT:

https://www.govdeals.com/index.cfm?f...=49&acctid=928

[300mileclub]

Six 8000 lb 24 ft ASME (seems to be, would have to study stampings in photo or send inquiry to seller if not sure) storage tubes are being offerewd in an auction ending April 4 2019 12:30 pm. In Chicago. One $100 bid submitted currently. Worth almost $200K.

https://www.publicsurplus.com/sms/au...ew?auc=2305348

[300mileclub]

Operational CNG station equipment being auctioned in Dickson TN. Bidding ends April 3, 2019 5:30pm PT and stands at $15K with no bids as of yet. Contact name and phone number listed in bid for inquiries such as model number, inlet pressure, flow rate. Was operating until prepared for auction. Companion auction offers spare parts. Aspro is the leader trademark equipment in Argentina and Brazil.

https://www.govdeals.com/index.cfm?f...83&acctid=3637

https://www.govdeals.com/index.cfm?f...84&acctid=3637