Announcement

Collapse
No announcement yet.

Baytech obtains 2010 certifications for 6.0l heavy duty natural gas engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Baytech obtains 2010 certifications for 6.0l heavy duty natural gas engine

    FOR IMMEDIATE RELEASE


    BAYTECH OBTAINS 2010 CERTIFICATIONS FOR 6.0L HEAVY DUTY NATURAL GAS ENGINE

    EPA and CARB Certified
    LOS ALTOS, California – October 7, 2009 – Baytech Corporation has obtained 2010 Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emissions certifications for Baytech’s dedicated compressed natural gas (CNG) fueled 6.0L heavy duty engine that is used in General Motors, Isuzu and Workhorse Custom Chassis heavy duty vehicles. The engine is certified to the 2010 NOx standard of 0.2 g/bhp-hr that now applies to all heavy duty engines, a standard that Baytech’s 6.0L CNG engine has been certified to since 2008.

    Vehicle models covered by Baytech’s new 6.0L CNG heavy duty engine certification include: the Chevrolet Express and GMC Savana 4500 Cutaway Van commonly used for shuttle buses and box vans; the Isuzu NPR HD and Chevrolet/GMC W4500 Cab Forward chassis used for flatbed, refrigerator/box, service body, small sweeper and utility applications; and Workhorse Custom Chassis heavy duty chassis used for commercial step vans and other applications. These vehicles, upfitted with Baytech’s 6.0L CNG engine, qualify for the maximum federal tax credit of $20,000 toward the incremental cost of the CNG system installation for vehicles in their weight class.

    “We are pleased to continue offering our 6.0L heavy duty CNG engine in 2010,” says Richard Turner, Vice President. “It is used in a variety of chassis that serve important segments of the natural gas vehicle market.”

    Baytech CNG systems incorporate Baytech’s gaseous fuel sequential Multi-Point Fuel Injection system technology. Baytech’s CNG engine calibration software is fully integrated with the vehicle control system to achieve high performance, low emissions, and compatibility with onboard diagnostics functions.

    About Baytech

    Founded in 1991, Baytech Corporation is the leader in engineering high performance, EPA and CARB certified CNG fuel injection systems for Chevrolet, GMC, Isuzu and Workhorse Custom Chassis vehicles that meet stringent emissions standards. Baytech is a small volume OEM manufacturer offering the largest line-up of CARB and EPA certified CNG vehicles in the industry.


    ###
    Contact:
    Richard Turner, Vice President
    Baytech Corporation
    650 949-1976
    [email protected]
Working...
X