Announcement

Collapse
No announcement yet.

FM4 Installation gas line?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cngaz
    replied
    Re: FM4 Installation gas line?

    I always use 1 1/4 " gas line to all FuelMaker VRA's, (FM4, FM2 or FMQ2-36)gives you a little extra in the line when it goes through the initial start up and less chance of low pressure error out.

    Leave a comment:


  • Royger
    replied
    Re: FM4 Installation gas line?

    I have a line that Tees out of the main line into the house. That tee goes into the garage, I can tap into it. I don't know how much pressure there will be in a 1/2" line. I talked to Sno-Motions. Rick said 3/4" for a fuel maker.

    Leave a comment:


  • freedml
    replied
    Re: FM4 Installation gas line?

    If you're running a new line, use the largest size as the cost of the pipe itself is minimal. If you have an existing 1/2" line go ahead and use it. If it's the only thing on the line, you should be fine way past 26'.

    Leave a comment:


  • Royger
    started a topic FM4 Installation gas line?

    FM4 Installation gas line?

    I'm installing a FM4. I heard you can use 1/2" for up to 26'. If you are installing for more than 26' you need a 3/4" line. I also heard you need a 1" line all the way. Does anyone have any firm foundation on this?
Working...
X