Do you want to know the difference between P30 and P36 recep's?

[jblue]

http://www.holtekonline.net/faq.htm

scroll all the way down ..

[jblue]

Re: Do you want to know the difference between P30 and P36 recep's?

some more spec's on NGV recep's:

http://www.airlinehyd.com/APOLLO/SNAPTITE/NGVS.PDF

[jblue]

Re: Do you want to know the difference between P30 and P36 recep's?

A resource for recep's:

http://www.thecngstore.com/index.php?cPath=2

I'm OD'ing on recep's tonight!

[jblue]

Re: Do you want to know the difference between P30 and P36 recep's?

The recep's on buses, etc that are large diameter/high flow are called TN5.

[jblue]

Re: Do you want to know the difference between P30 and P36 recep's?

another resource ..

http://www.weh.us/products/refueling-systems-cng/

Check out the Emergency Fueling Set.

[siai47]

Re: Do you want to know the difference between P30 and P36 recep's?

The P36 is 24mm in diameter along its entire length. The P30 has a 25mm increased diameter ring toward the base. This prevents the P36 nozzle from seating on the P30 recepticle. This design setup does allow for a P30 nozzle to fit a P36 recepticle. If you got a "deal" on P30 recepticles, the ring can be cut down on a lathe 1mm allowing the P36 nozzle to seat.

Remember, don't try this at home .

[Highmarker]

Re: Do you want to know the difference between P30 and P36 recep's?

Also remember that it is against NFPA 52 to use any adapters to make a P36 nozzle fit onto a P30 receptacle.