Announcement

Collapse
No announcement yet.

need help finding parts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PrairieGas
    replied
    Re: need help finding parts

    Why do you think the reg is bad? I have a 1994 15 passenger Van/wagon. The regulator on this was made by GFI. I also have some parts from a 4.3 1995 era GM that share the same regulator. I thought that the reg was defective and exchanged them, all works ok. My Dodge has a dedicated system. Hope this help in your search for parts.

    Leave a comment:


  • cowboy
    replied
    Re: need help finding parts

    dodge part is like 1700 dollers impco 325 no dodge sticker if yours cant be fixed I have impco part # around here some where I will look for it and post it

    Leave a comment:


  • cowboy
    replied
    Re: need help finding parts

    I think this is a impco reg it has a oring around the outside screw the front off and remove oring call impco if it is soft and spongy you have gotting wet gas and it ate it I have had this proplem with my 93 and my 96 dodge van it is about 7.00 dollers with shipping and ten min to fix it will get worse good luck do not put sealer on oring

    Leave a comment:


  • cngmike
    replied
    Re: need help finding parts

    Contact GFI they should be able to get the closest supplier

    http://www.teleflexpower.com/helpline.php?op=gfiauto

    Leave a comment:


  • frank0198
    started a topic need help finding parts

    need help finding parts

    I have a 94 dodge van 350, it is leaking from the pressure regulator. Its a chryler part # 52018. tried dodge and all local auto parts with no luck. need help please.
Working...
X