If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Need advice on removing the steel protective cover
Need advice on removing the steel protective cover
I got all the bolts out and I can almost take the cover off completely. However, the rubber hose is the only thing stopping me. Can I un-screw that? Or will fuel from the tank come hissing out?
Re: Need advice on removing the steel protective cover
Assuming your talking about an OEM GM truck: There is a bolt around the filler nozzle. Unscrew that and the cover will come right off. The hose stays attached to the tank.
Comment