Centralized Parts info for Cavalier here

[Curtis Co-Founder CNGChat.com Find all posts View Profile Close Curtis]

Please post information on parts availability, part #'s, manufacturer, source, cost, interchangeable part and number in this thread. Please limit postings to parts info only. If you've posted it in this forum already... please list it again here to make all you Cavi owners lives easier.

[wheelhorse1962 Member Find all posts View Profile Close wheelhorse1962]

Re: Centralized Parts info for Cavalier here

I am looking for information concerning the Gas Mass Sensor GM Part number 52369145 for a 2002 Chevrolet Cavalier/CNG. I am in need of replacement electronic circuit boards or a new or used assembly GM Part number 52369145Visiting the GM Parts web site for part number 52369145 I see a listing for this part number at a cost of $1552.88 plus a $341.63 Shipping and handling fee. I would appreciate any information anyone can supply as to the OEM manufacturer or possible source of supply for the whole Gas Mass Sensor or just the electronic circuit boards through another source.

[dovh49 Member Find all posts View Profile Close dovh49]

Re: Centralized Parts info for Cavalier here

IMPCO HPR 3600 (Interchangeable part original is HPR 3600-GM)
~$161
Send me a PM if you find out how long it takes for this to get to you.

Equipment & Systems Engineering, Inc.

14260 SW 136th ST. # 4

Miami, Florida 33186

Tel: 305 378 4101

Fax: 305 378 4121

[KDB4 Member Find all posts View Profile Close KDB4]

Re: Centralized Parts info for Cavalier here

I'd like to buy a broken gm cavalier gas mass sensor if anyone has the old part around after replacing one. I need the mixer control valve part only (the part with the butterfly valve inside the gas pipe), which is attached to the gas mass assembly.

[utahpilot Member Find all posts View Profile Close utahpilot]

Re: Centralized Parts info for Cavalier here

I'd like to find a dash plate piece (where the windshield meets the dash on the inside) for a 2001 Cavalier. Mine, like all I've seen, is cracked and broken. I tried to remove it and it just shatters. I have one from a scrap yard, but it came from another GM car which I was told would fit but it is slightly different. anyone have a part number for the plastic plate?

[Highmarker Regulars Find all posts View Profile Close Highmarker]

Re: Centralized Parts info for Cavalier here

to: KDB4 we have like 6 broken gass mass sensors for cavaliers laying around. If you still need it let me know

How much do you want for these gas mass sensors?

[KDB4 Member Find all posts View Profile Close KDB4]

Re: Centralized Parts info for Cavalier here

to: KDB4 we have like 6 broken gass mass sensors for cavaliers laying around. If you still need it let me know

Thanks for the reply, I'll send you a message.

[terylgar Member Find all posts View Profile Close terylgar]

Re: Centralized Parts info for Cavalier here

There is a company called Coverlay Manufacturing that makes a cover that exactly covers that cracked dash. You really don't want to replace it, it is much larger than it appears at first. It is a major part of the dash. You may have to paint the Coverlay part if they don't have the exact color. Teryl

[Sam Taylor Member Find all posts View Profile Close Sam Taylor]

Re: Centralized Parts info for Cavalier here

I have a 2001 Cavalier which has a broken male latch which is attached to the car body, which secures the access door for the natural gas intake nozzle.

This part has been discontinued by GM. There is a website the local GM dealer gave me where I can order the part, but I have not been able to ascertain the part number. The website has no customer service whatsoever, they just react to part numbers and credit card numbers.

Does anyone know how I can easily get this part? I presently use tape to secure the door and it is screwing up the paint.

Thanks for your help.

[DAJ1111 Member Find all posts View Profile Close DAJ1111]

Re: Centralized Parts info for Cavalier here

I have a 2001 Cavalier which has a broken male latch which is attached to the car body, which secures the access door for the natural gas intake nozzle.

This part has been discontinued by GM. There is a website the local GM dealer gave me where I can order the part, but I have not been able to ascertain the part number. The website has no customer service whatsoever, they just react to part numbers and credit card numbers.

Does anyone know how I can easily get this part? I presently use tape to secure the door and it is screwing up the paint.

Thanks for your help.

I am looking for one as well, If and when I find one, I will let you know. Thanks

[gbilek Member Find all posts View Profile Close gbilek]

Re: Centralized Parts info for Cavalier here

I am looking for a source for a Impco hpr-3600 to replace the gmc HPR in my 2002 cavalier. Does anyone have any online sources?

[Lancer Automotive Group ***** Sponsor Find all posts View Profile Close Lancer Automotive Group]

Re: Centralized Parts info for Cavalier here

We have some in stock at our shop, just call and ask for Justin he can give you a price.

[Pato94 Member Find all posts View Profile Close Pato94]

Re: Centralized Parts info for Cavalier here

IMPCO HPR 3600 (Interchangeable part original is HPR 3600-GM)
~$161
Send me a PM if you find out how long it takes for this to get to you.

Equipment & Systems Engineering, Inc.

14260 SW 136th ST. # 4

Miami, Florida 33186

Tel: 305 378 4101

Fax: 305 378 4121

There has been a price increase from this supplier its now $350

[Jeffaggie Member Find all posts View Profile Close Jeffaggie]

Re: Centralized Parts info for Cavalier here

Did you find a gas Mass Sensor and if so where were you able to find one. I may also have the same problem. Thanks Jeff L.

I am looking for information concerning the Gas Mass Sensor GM Part number 52369145 for a 2002 Chevrolet Cavalier/CNG. I am in need of replacement electronic circuit boards or a new or used assembly GM Part number 52369145Visiting the GM Parts web site for part number 52369145 I see a listing for this part number at a cost of $1552.88 plus a $341.63 Shipping and handling fee. I would appreciate any information anyone can supply as to the OEM manufacturer or possible source of supply for the whole Gas Mass Sensor or just the electronic circuit boards through another source.

[Jeffaggie Member Find all posts View Profile Close Jeffaggie]

Re: Centralized Parts info for Cavalier here

Where you able to find one and if so where. I may need one for my cavalier?? Jeff L.

I'd like to buy a broken gm cavalier gas mass sensor if anyone has the old part around after replacing one. I need the mixer control valve part only (the part with the butterfly valve inside the gas pipe), which is attached to the gas mass assembly.