Announcement

Collapse
No announcement yet.

CNG door-Cavalier

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CNG Utah
    replied
    Re: CNG door-Cavalier

    I know I'm resurrecting an old thread, but I just love all the smart people on CNG chat. I bought some of these latches a while ago and they worked great. I needed some more, so I just had to find this thread again and I was set.

    http://cgi.ebay.com/FRIGIDAIRE-WHIRL...item2554fdd524

    This is the best price I could find for the latch on ebay as of today.

    -Derek

    Leave a comment:


  • 2349
    replied
    Re: CNG door-Cavalier

    Thanks for all of the help. I couldn't find a plastic one, so I tried a metal one. Big mistake. I finally had to go online and get one off ebay. If you need here is where I got mine
    http://cgi.ebay.com/Replacement-for-...mZ160116629742
    Pretty cheap, too.

    Leave a comment:


  • siai47
    replied
    Re: CNG door-Cavalier

    Actually picked up an identical part at the appliance store. Thanks for you guys thinking of the clothes dryer option. The part I bought is a dryer door latch kit that includes both the latch and the striker. The newer stock that the store had included a metal striker. However, they found an older one in stock that still had the plastic striker. The appliance guy said either striker would fit. (you should try to find the old style striker otherwise when you go to a car show or try to sell your car through the Barrett-Jackson auction, the judges will deduct points for having the wrong part installed) Anyway, it's a Robertshaw/Uni-line division part with a part number of 83-021 66021. Fits Whirlpool dryers and includes instructions on how to take your dryer door apart to install. You would have thought that GM engineers would have at least used a latch off of a Frigidaire.

    Leave a comment:


  • icspotz
    replied
    Re: CNG door-Cavalier

    The latching hardware on my 2001 cavalier is the same as the latch on many home clothes dryers. They are available for a few dollars at appliance repair stores or can be viewed online at appliance repair webstites. Some dryers have two latches for optional left or right swing door options. Check out your utility room and steal the one your not using.

    Leave a comment:


  • darress
    replied
    Re: CNG door-Cavalier

    I just went out to my Cavalier to see what these parts look like to see what could be used for a replacement and it looked really familiar to me. I came back inside and went to my furnace. That was it! The pins look exactly like the pins that hold the furnace door on, same shape and design. I didn't pull one out, but it may be an exact fit. Check your furnace and try one out. Let us know if it works.

    Leave a comment:


  • siai47
    replied
    Re: CNG door-Cavalier

    The part of the latch that goes in the door is still available. However, the little pin that sticks out by the fill point (the striker) is not. I am goiing to try a cabinet magnet on the door and a metal striker glued to the body for the magnet to latch on to. I will post some pictures if I don't totally mess it up

    Leave a comment:


  • utahpilot
    replied
    Re: CNG door-Cavalier

    let me know if you find it, I'm trying to find a fuel door for the CNG fill point and am having no luck

    Leave a comment:


  • 2349
    started a topic CNG door-Cavalier

    CNG door-Cavalier

    Need help finding the plastic parts that snap my '01 Cavalier CNG door shut. Dealer says not available.
Working...
X