fill noozle

[BruceEB]

Could anyone help me find a good used or new fill nozzle for a 1998 contour gfi system thanks

[larrycng]

Re: fill noozle

Check with OPW ( www.opw-fc.com ) Look under fuel receptacles (that is the vehicle side of fueling). I'm guessing that you have 3000 psi tanks with a 1/4 inch high pressure stainless steel line. They have the receptacles with the fitting attached -- you just have to depressurize the system and change it out.

check the pressure rating on the cylinder to be sure you get the correct receptacle; 3000 psi tanks = a P-30 (OPW LD-30) or for 3600 psi = a P-36 (OPW LD 36). The P-30 or P36 will be on existing receptacle. Make sure your receptacle matches the lowest cylinder pressure rating.

Remember, you're dealing with high pressue, make sure that someone with experience does the work.

Larrycng

[locosmotion]

Re: fill noozle

I've got one, pulled from a 98' contour. Stainless line and plastic cup come with it. Shoot me an offer.

Thanks,
Phil

[BruceEB]

Re: fill noozle

Is this the end that fits on compressor unit sorry i was not more clear

[locosmotion]

Re: fill noozle

No this is the car side.