Announcement

Collapse
No announcement yet.

Had trouble with the Bauer / Coltri valve Tool

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Had trouble with the Bauer / Coltri valve Tool

    This worked. I've broken enough pins on the Bauer / Coltri versions of this tool. I was worried it'd never shift. This vice trick stopped the pins climbing in the valve and breaking. Yes, that's a three foot breaker-bar on there! Next time I'll use the proper Nickel or Aluminium anti-seize! Next trick if this had failed, would have been to weld a bit scrap bar to the valve.

    BauerValve Tool.png
    Last edited by BritCNGUser; 07-25-2017, 04:21 PM.
Working...
X