Announcement

Collapse
No announcement yet.

2012 ford transit cylinder misfire

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2012 ford transit cylinder misfire

    i have a 2012 ford transit xlt cng only fuel with 60000 miles. i keep getting a p0301 cylinder 1 misfire. i changed all the plugs and only 1 coil pack where the problem is and still getting a cylinder1 misfire. they check the coil and pressure test and its good. What would be the next step and i really cannot figure out whats wrong with it. i need help please. Thank you

  • #2
    Could be a faulty fuel injector. Is it an IMPCO conversion system (check the emission label under the hood)? If so I think these are the installed injectors - you will need to verify.
    https://www.fiveomotorsport.com/ev14...jectors-bosch/

    Try calling one of these dealers:
    http://impco-asap.com/cms/home/locators_home

    Comment


    • #3
      its BAF technology conversion system.. they swapped the injector to the other and i'm still getting cylinder 1 misfire. What will be the next possible causes the cylinder 1 misfire.

      Comment


      • #4
        Are the valves adjustable on that engine ?

        Comment


        • #5
          the valves are adjustable but the compression test are good and equal pressure

          Comment

          Working...
          X